Japan (Mandatory)
Mode 2 PSE Diamond
Mode 2 & Mode 3 JET or EVSE Certification (JARI)
Mode 4 CHAdeMO
South Korea (Mandatory)
KC Certification
Thailand (Mandatory)
PEA Certification (MEA & EGAT)
Philippines (Mandatory)
DTI Certification (Philippine Department of Trade and Industry Department Administrative Order No. 22-10 (DAO No. 22-10), Mandatory)
Rated Parameters for AC Electric Vehicle Charging Equipment and Facility Components
Type 1 Vehicle Connectors and Input Sockets:
Single-phase 250V, 32A
Type 2 Vehicle Connectors, Plugs, and Sockets:
Single-phase: 250V, 13A, 20A, 32A, 63A, or 70A
Three-phase: 480V, 13A, 20A, 32A, or 63A
Type 3 vehicle connectors, plugs, and receptacles:
Single-phase: 250 V, 16 A, or 32 A
Three-phase: 480 V, 32 A, or 63 A
DC electric vehicle charging equipment and facilities with a rated output voltage not exceeding 1500 V DC
Configuration parameters for DC electric vehicle charging equipment and facilities
Configuration AA: Maximum rated voltage and current 600 V DC, 200 A
Configuration BB: Maximum rated voltage and current 750 V DC, 250 A
Configuration EE: Maximum rated voltage and current 600 V DC, 200 A
Configuration FF: Maximum rated voltage and current 1,000 V DC, 200 A
Note: Couplers that are built-in or permanently mounted in a vehicle are not within the scope of this regulation
Applicable Standards
1. PNS IEC 61851-1:2019
Electric vehicle supply equipment for charging electric road vehicles, including plug-in hybrid road vehicles (PHEV)
2. PNS IEC 61851-23:2018
DC electric vehicle charging station
3. PNS IEC 62196-1:2019
Plugs and socket-outlets, vehicle connectors, and vehicle inlets—conductive charging of electric vehicles
4. PNS IEC 62196-2:2019
Dimensional compatibility and interchangeability requirements for AC pin and contact tube accessories
5. PNS IEC 62196-3:2019
Dimensional compatibility and interchangeability requirements for DC and AC/DC pin and contact tube vehicle couplers
PS Mark
Factories submit samples to authorized laboratories for testing and report issuance
Overseas manufacturers may hold the certificate
The factory must have partial testing capabilities
Factory audit
Management system audit
Certificate valid for 3 years
Led by Arnool with assistance from the applicant
ICC label
Certified importers in the Philippines must submit a random sample from each shipment upon arrival to an authorized laboratory for testing and issuance of a test report
Must provide ILAC test reports and ISO management system certificates
After the spot-check testing is passed, purchase the ICC label and affix it to the product
Led by Arnool with assistance from the applicant
Europe
Safety: EN-61851-1; EN-6151-23
EMC: EN 61851-21-2
Wireless: EN 300 330; EN 301 489-1; EN 301 489-3; EN 300 328; EN 301 489-1; EN 301 489-17
Protocol: ISO-15118; DIN 70121; EVCC;
Other: EN-61439-1-7
United States
Safety: UL 2231 UL 2594 UL 991 UL 2202
Software: UL 1998
FCC - ID: FCC Part 15.247 & 15.249
Energy STAR: Energy STAR program requirements for EVSE, versions 1.0 and 1.1;
-END-
Scan the QR code to follow
Arnool ARNOOL